Other Dart Accessories

Bulls DEAL-A-DART Card Game

BULLS DARTS
DA-BULLS-DEALADART
Add to cart

Bull's DEAL-A-DART Card Game

Bull's Dry Erase Marker

BULLS DARTS
DA-BULLS-DRYMRKR
Add to cart
Bull's Dry Erase Marker

 

Bull's Dry Eraser

BULLS DARTS
DA-BULLS-DRYERASER
Add to cart

Bull's Dry Eraser

Dart Rosin Bag

Darting Around
DA-DARTROSIN
Add to cart
Dart Rosin Bag - 1 Bag
Add to cart
Dart World Out Chart Poster
Add to cart
Duo Sure Grip Replacement Sleeves

Dynasty Dart Board Emblem Bracket

DYNASTY DARTS
DB-DYNASTY-EMBBRACKET
JUST ARRIVED
Add to cart

Size (Wall mounting part): Height 8.2cm (3.2in), Width 9.8cm (3.9in), Thickness: 0.9cm(0.4in)

Included Parts: Round Disc x 1, Wall mounting part x 1, Short Screws x 4, Long Screws x 4 Accessory for installing a Steel tip Board.

This bracket not only allows your board to be very stable but also allows the board to rotate even after installation. Compatible with the "EMBLEM series" from Dynasty.

*Note: A stabilizing piece of rubber is installed on the back of the steel tip boards from the "EMBLEM series". Usage of this bracket does not require removal of the rubber.


Installation process:

1.Attach the round disc on in the center of the back of the steel tip board using the 4 short screws.

2.Attach the parts that need to be mounted on the wall using the 4 long screws at a height of 173cm (5 feet 8 inches) from the floor to the center of the bullseye.

3.The round disc slides from the top into the mounted wall bracket. *If the screw heads are coming out of the parts, the boards will not rotate. Please make sure that each screw is set all the way.

JUST ARRIVED
Add to cart
Dynasty Kusabi Dart Board Wedges comes in a pack of 3. Allows you to firm up your dartboard and prevents the dartboard from wobbling

Harrows Beer Mug Sharpener

Harrows Darts
DA-HARROW-BEERSRP
Add to cart
Harrows Beer Mug Sharpener

Harrows Claw Bottle Opener Key Fob

Harrows Darts
DA-HARROWS-CLAW
Add to cart

Harrows Claw Bottle Opener Key Fob

The Harrows bottle opener key ring is an essential darters tool. Keep your keys secure on the super tough ring. With the aerospace alloy bottle opener you will also always be prepared for that all important drink anytime, anyplace, aerospacetastic

Padded Vinyl Dart Mat

Great Lakes Darts
37-0106
Add to cart

Padded Vinyl Dart Mat

  • 24"W x 9.9"D x 1/8"H

Round Stone Sharpener

Darting Around
37-0126
Add to cart
Round Stone Sharpener - Great for keeping the point of metal tip in shape for play
Add to cart
  • Add-a-gram to adjust the weight of your dart
  • 2 Grams
Add to cart
  • Add-a-gram to adjust the weight of your dart
  • 2 Grams
Add to cart
  • Add-a-gram to adjust the weight of your dart
  • 2 Grams

Square Stone Sharpener

Darting Around
37-0176
Add to cart
38-0142
Square Stone Sharpener - Great for keeping the point of metal tip in shape for play
Add to cart
MSRP: $0.99
Sure Grip Rubberized Replacement Sleeves

Trident 180 Point Cones

Winmau Darts
DA-TRICONE
Add to cart
Development and details:
  • The Trident concept is very simple and extremely effective.
  • Due to modern manufacturing techniques all darts manufactured since the mid 90's using CNC machinery have a flat face at the point end of about 3.5 - 4mm diameter.
  • The dart point is pressed into a hole in the face leaving a square shoulder where the point meets the dart barrel. This shoulder is the cause of the vast majority of bounceouts and deflections due to the shoulder hitting the hard edge of the flight or barrel.
  • Trident 180's are small inexpensive dart point cones that slide snuggly onto a standard point and blend the shoulder between the point and the barrel smoothly thus causing an incoming dart to glide past the flights already in the board and into the target.
  • Dennis Priestley, Mark Webster and Trina Gulliver have all been helping us develop Trident 180 since we first developed the idea over 9 months ago.
  • Trident 180�s are designed to fit standard dart points that typically use a 2.25 � 2.40mm dart point.
We cannot legislate for all manufacturers standard sizes, but even if the cones are a little tight you can place them in warm water to help slide them on.If you do play with non standard dart points that are ringed, knurled etc you may need to fit Tridents during re-pointing or persevere until your points have worn down slightly.
Why you should play Trident 180's:

1) Reduced deflections:
  • The simplicity of the design allows the cone to snugly fit between the point and dart barrel to create a natural progression line.
  • The new streamlined shape eliminates the �Step Edge Fault� on the majority of darts. By removing this 90 Degree shoulder or step, your darts can work with greater efficiency both in flight and on contact with another dart or leading edge of a flight.
  • Tridents Anti-Step design means the dart can simply slide past the leading edge of the flight sticking out of the dartboard to go on and score on up to 50% more occasions.
  • Trident 180�s can give you an unmatched improvement in scoring without changing your darts.
You can try this simple theory yourself by holding a dart with a Trident 180 Nose Cone fitted and then push the dart point at the flight, where it can pass the flight and continues its path to the dartboard and scoring area.

With darts being a game won and lost on millimeters you�d be mad not to fit Trident 180�s to your darts.

2) Improved Aerodynamics:
Darts using Trident 180 technology have less oscillation around the tip of the point in flight than darts without the Trident 180 cones fitted enabling a smoother trajectory.
This is because darts without Trident 180�s have a 90 degree shoulder where the airflow directs vertically off this Step which can result in greater oscillation or movement of the dart in flight.
As a result of less movement in flight the airflow can travel efficiently over the whole dart with no interruptions, and reduce oscillation at the point.

3) Increased flight protection:
During our testing we noticed that Trident 180�s actually serve to increase the life of your flights as the Step Edge is removed and so the flights do not come into contact with the severe shoulder of the dart, thus suffering far less impact damage.

4) Stylish Design and choice of colours
Trident 180�s are available in Black or White and once you�ve seen your darts Trident 180�s you�ll think they look naked without them.

Research and Testing:

The concept was tested extensively using an area on a dartboard about 8 inch diameter packed with over 30 darts with 5,000 throws of darts recorded into the pack of darts, (Darts missing the area were discounted) and bounceouts were recorded using Trident 180s and without Trident 180�s.
Our in-house results showed the bounceout rate was reduced by more than 50% on darts fitted with Trident 180�s compared to those without.

Looking at the Airflow of darts in a wind tunnel we noted the air deflection on the point as air passes over the dart is significantly reduced with the removal of the Step Edge and resulted in reduced wobble by up to 8mm.

Unicorn Dart Board Clamp

Unicorn
DA-UNICORN-CLAMP
Add to cart
Unicorn Dart Board Clamp

XQMax Laser Toe Line

XQMAX
DA-XQMAX-LASERLINE
Add to cart
Xqmax laser oche black, packed in colorbox. Battery not included. Output power <1mw, wavelength: 650nm.